01 Self-Aligning Ball Bearing
Authorized FAG supplier Bearings · Housings · Adapter sleeves
FAG bearings and their mounting parts, quoted together in one enquiry.
Heavy Industrial Machinery Company supplies only FAG. Send the full designation, bearing position and the housing or sleeve reference, and we quote the complete assembly for your heavy machinery overhaul or emergency replacement.
§ 01 · Product families
Browse FAG bearings by family
Every category below is FAG only, so you can go straight to the series your bearing position needs, from deep groove ball bearings to housings and adapter sleeves.
§ 02 · Selection reference
Which FAG bearing series fits which bearing position?
Choose the series by the load and the position, not by bore size alone. The table matches each FAG family to its typical bearing positions and lists what to include in your enquiry, so we can confirm the exact execution before quoting.
| FAG series | Typical bearing position | Include in your enquiry |
|---|---|---|
| Deep groove ball bearings | Electric motors, fans, general machinery | Full suffix, seal or shield type, DE or NDE position |
| Spherical roller bearings | Heavily loaded shafts, positions where misalignment must be accommodated | Bore type, clearance (e.g. C4), adapter sleeve reference |
| Cylindrical roller bearings | Gearboxes, industrial transmission assemblies | Complete designation including cage and design suffixes |
| Tapered roller bearings | Arrangements carrying combined radial and axial loads | Single bearing or matched set, quantity per position |
| Angular contact & spindle bearings | Precision rotating equipment | Contact angle, arrangement and any special execution noted on the equipment specification |
| Self-aligning ball & thrust bearings | Bearing positions where these types are specified | Designation as specified; approved alternatives only with your written approval |
| Housings, adapter sleeves & mounting parts | The complete bearing assembly | List each item on its own line of the enquiry |
Selection reference only. Final series and execution are confirmed per enquiry; any technical change requires buyer approval.
§ 03 · Listed references
FAG bearings listed online
2,952 FAG references are listed online. If your designation is not shown, send it anyway and we will check it.
01 
02 
03 Deep Groove Ball Bearing
6088 Deep Groove Ball Bearing – Durable Timken/NSK/IKO/Koyo/NTN
Check this reference →
04 
05 
06 Angular Contact Ball Bearing
Micro Deep Groove Ball Bearings 676-679 – High-Precision NSK/Timken/NTN
Check this reference →
07 Angular Contact Ball Bearing
R165141420 Rexroth Flange Linear Guide Rail Block Bearing
Check this reference →
08 Angular Contact Ball Bearing
R165151210 Rexroth Flange Linear Guide Rail – High-Precision Slide Block Bearing
Check this reference →
09 
10 
11 Deep Groove Ball Bearing
OEM Bearings Manufacturer – Premium Quality, Competitive Prices, Value for Money
Check this reference →
12 Deep Groove Ball Bearing
High-Quality Bearings & Auto Components – OEM, Cost-Effective
Check this reference →§ 04 · Mounting components
List housings and adapter sleeves on their own lines
Housings, adapter sleeves and other mounting parts must be listed separately in your enquiry. Then the whole assembly arrives complete instead of failing at the machine because one part was missing.
- 01One line per itemBearing, sleeve and housing each with its own reference and quantity.
- 02Tie each part to a positionMark DE and NDE so quantities match the actual shaft layout.
- 03Quoted in the same enquiryBearings and mounting components on one written quote.
Mounting parts and bearings in stock listings
Self-Aligning Ball Bearing
NSK 1305/1305TNi Self-Aligning Ball Bearings for Heavy & Impact Loads
Get quote →
Deep Groove Ball Bearing
Koyo NTN NACHI 6004 Deep Groove Ball Bearing – ZZ/2RS/DDU, High-Precision for Motors & Transmissions
Get quote →
Deep Groove Ball Bearing
6088 Deep Groove Ball Bearing – Durable Timken/NSK/IKO/Koyo/NTN
Get quote →
Taper Roller Bearing
Timken & NACHI Tapered Roller Bearings 33211/33011/33114/32910 – High-Precision, Heavy-Duty
Get quote →
Pillow Block Bearing
UCFL217/UCFL218/UCFL218-56 Pillow Block Bearing – High-Load, Pre-Lubricated, Ready to Install
Get quote →
Angular Contact Ball Bearing
Micro Deep Groove Ball Bearings 676-679 – High-Precision NSK/Timken/NTN
Get quote →
Angular Contact Ball Bearing
R165141420 Rexroth Flange Linear Guide Rail Block Bearing
Get quote →
Angular Contact Ball Bearing
R165151210 Rexroth Flange Linear Guide Rail – High-Precision Slide Block Bearing
Get quote →
§ 05 · Identification
How we confirm a FAG bearing when the suffix is missing
When the suffix is missing, we confirm the exact execution before quoting, using the equipment model, bearing position and what is still readable. A size match alone is not accepted as proof.
“When a mill bearing failed, we sent the worn FAG number by WhatsApp and they identified the correct reference within hours.”
Q · 01
The marking is worn off. Can you still identify it?
Usually yes. Send photos of the bearing, the readable part of the number, the equipment model and the bearing position. We confirm the reference with you before any quote.
Q · 02
Our list only shows a short stock code. Is that enough?
No. A short code doesn't show the original seal type or clearance. We ask for the equipment model and position, then confirm the full designation and DE/NDE split.
Q · 03
The equipment calls for a special execution. What then?
We match the specified execution, not just the dimensions. Any alternative is marked separately on the quote and used only with your approval.
§ 06 · Quotation process
From enquiry to receipt check in six steps
Every order starts with full identification and ends with a check on receipt. The written quote states model, quantity, price, currency, stock status, estimated lead time, validity and applicable terms.
- 01
Send the enquiry
Via WhatsApp or email: equipment model, full suffix, position, sleeve or housing, quantities, destination and postcode, required date.
- 02
Complete identification
Confirm exact execution, a complete assembly, and whether marked alternatives are acceptable.
- 03
Written quote
Price, currency, stock, lead time, validity, shipping or tax terms, and the product documents available.
- 04
Review & order
Check specification, quantities, delivery details, payment method and terms, then place the order.
- 05
Shipping
Transport method, dispatch timing and required shipping documents confirmed.
- 06
Receipt check
Check labels, quantities and condition. Any discrepancy: send the order number and photos.
§ 07 · Genuine product & documents
Original Schaeffler packaging and supporting documentation
Every FAG bearing we supply comes in original Schaeffler packaging with its supporting documentation. Customs clearance and end-customer reports depend on these papers, so confirm the exact document list at quotation stage.
- ◆Original Schaeffler packaging
- ◆Supporting documentation as supplied
- ◆Shipping documents confirmed per order
§ 08 · Enquiry
Send your bearing list for a written quote
The fastest route is your full list on WhatsApp: designations with suffixes, DE/NDE positions, housings and sleeves, quantities, destination and required date. Distributors, maintenance contractors and plant teams worldwide use the same process.
Send Your Bearing List →- +86 152 691 88020
- info@fagru.com
- Office